Lifts for passenger cars DARZ P14-14, P2-01MN, P1-01MN, etc.

DARZ company offers lifts for passenger cars.

Four-post, rolling lifts P14-14 with an electromechanical drive are designed for hanging passenger cars with their own weight up to 6 tons when performing their maintenance and repair. The car is picked up by the wheels.

• P14-14. Technical specifications.

---

The four-post electrohydraulic P2-01MN lifts are equipped with niches for the front wheels and sliding platforms for adjusting the rear wheels of the car. The lift ladders are made whole and their length allows for the repair and maintenance of cars with both a short base and executive class cars, including long-wheelbase SUVs and minibuses.

• P2-01MN. Technical specifications.

---

Two-post electromechanical lifts P1-01MN are designed for the repair and maintenance of cars of various classes weighing up to 5 tons. They are highly reliable and durable. The increased distance between the racks, the installation of the lift on the same level with the floor allows you to service a large range of passenger cars from "Oka" to imported executive cars, including armored frame SUVs and minibuses.

• P1-01MN. Technical specifications.

---

Floor-mounted electromechanical double-column lifts P1-01MN Antey are designed for the repair and maintenance of cars of various classes weighing up to 5 tons. To lift and repair frame cars, it is necessary to additionally install enlarged screw supports on the lift. Special pickups are used to lift and repair passenger minibuses of the Mercedes-Sprinter brand.

• P1-01MN Antey. Technical specifications.

---

Hydraulic double-column lifts P2-07M are designed for the repair and maintenance of passenger cars with a mass of up to 4.5 tons. The extended coverage area allows you to service cars with a small ground clearance and a short base, as well as frame cars and minibuses of the Gazelle type.

• P2-07M. Technical specifications.

---

Double-column electromechanical lifts P-97MK Leader. The extended coverage area and the small receiving height of the carriages of the electromechanical double-column lift allow servicing cars with a small ground clearance and a short base, as well as frame cars and Gazelle-type minibuses.

• P-97MK Leader. Technical specifications.

---

Double-column electromechanical lifts P-97MKB are designed for the repair and maintenance of passenger cars weighing up to Z t. The asymmetric arrangement of the racks and the flat floor provide additional convenience when servicing cars (convenience of opening the front doors, convenient check-in, free movement of the tool cart).

• P-97MKB. Technical specifications.

---

Electromechanical double-column lifts P-97N are designed for the repair and maintenance of passenger cars weighing up to Z,2 tons. The extended coverage area and small receiving height of the carriages of the electromechanical double-column lift allow servicing cars with a small ground clearance and a short base, as well as frame cars and minibuses of the Gazelle type.

• P-97N. Technical specifications.

---

Hydraulic traverses with pneumohydraulic drive P2-01M.170 are designed for lifting the body and hanging the wheels of the car over the platform. Roller rollers make it easy to install the traverse on the lift in any position. The traverse is equipped with a mechanical stopper. The traverse can be installed on platform lifts and observation pits.

• P2-01M.170. Technical specifications.

---

Ladders (pit tracks) TJ-359, TJ-359D are installed on the edges of the inspection pit and are designed for car maintenance and repair, including work on adjusting the front and rear wheels of the car. On the ladders there are niches for turning circles and sliding platforms for adjusting the rear wheels of the car. A traverse can be installed on the ladders for hanging out the wheels of the car.

• CHA-359, CHA-359D. Technical specifications.

---

Price list